Digigram UAX220v2 User Manual download pdf (Page 6)

UAX220-Mic: Additional hardware features

• 2 balanced

∗

analog mono mic/line inputs with a maximum input level of

+10 dBu

• 2 knobs for left and right input gain adjustment, from +20 dB to +55 dB with

switchable -20 dB input attenuation

• Left and right 48 V phantom power switches for static microphones

Software features

UAX220v2 and UAX220-Mic comply with the USB Audio specification.

Therefore, and depending on the operating system used, they are compatible

with WDM DirectSound, ALSA, and CoreAudio. Furthermore, it is possible to

use a third-party ASIO driver (Asio4all, Ploytec).

HARDWARE REQUIREMENTS

• A USB port (standard 1.1 or higher)

• Minimum Apple Macintosh configuration:

PowerMac G3, G4 or G5 with 128 MB RAM

• Minimum PC configuration:

Pentium III (or equivalent), 256 MB RAM.

Supported operating systems

• Windows XP

• Mac OS X

• Linux

HARDWARE INSTALLATION

Connect the UAX220v2/UAX220-Mic to the USB port (USB 1.1 or 2.0) of

your computer. It will then automatically be detected by the operating system

and its driver will also be automatically installed.

Note: If you have several USB peripherals connected to your computer, they

may consume more energy than the USB port can provide. In this

case, disconnect some of these peripherals.

SOFTWARE INSTALLATION

Your UAX220v2/UAX220-Mic does not require any driver installation,

because it meets the USB Audio 1.0 standard, which is supported by your

operating system (Windows XP, Mac OS X, Linux).

∗

can be used with unbalanced signals

1 2 3 4 5 6 7 8 9 10 11 ... 17 18

No comments

Digigram UAX220v2 User Manual Page 6