Digigram CANCUN 442-Mic User Manual Page 1

CANCUN 222-MicCANCUN 442-Mic Professional USB Audio Interface Version v1.00 User manual1

FIRMWARE UPDATE Your Cancun is delivered with a firmware version applied in factory. A more recent firmware version may have been released by Digigram

A confirmation window is displayed. Click on button “Yes” to confirm the firmware update.The displayed green bar indicates the firmware update progres

SETTING AND MONITORING CANCUN PARAMETERS FROM THE CONTROL PANEL Starting the control panelCancun parameters can be set from its control panel.To open

Click on to set the global parameters of CANCUN. Cards: allows select the CANCUN device to set its parameters.Clocks: allows selecting the sampling

Click on to set the parameters of audio inputs. Each slider allows adjusting the analog gain for an analog input from 0dB to + 55 dB, by 1 dB steps

48 V phantom power on the input the mic is connected to.To activate the 48V phantom power on an input, click on the OFF button on the right of 48V for

Adjusting the gains on the analog outputs and displaying vu-metersClick on the icon to set the parameters for audio outputs. For each output, the vo

Configuration of headphone output parameters Click on the icon to adjust the settings of the headphones output.The central fader allo

Click on the icon on the bottom left of the central headphones window to access the DIGITAL OUTPUT section, for adjusting the levels of the signals

SETTING CANCUN PARAMETERS FROM THE CANCUN TOUCH PANELInput gains settingPadPress the Pad touch button to enable/disable the fixed attenuation on the d

For technical support,please contact your supplier www.digigram.com Digigram S.A.Parc de Pré Milliet, 38330 Montbo

Output gains settingsThe analog output gain is adjustable with the upper rotary button when:· the IN/OUT touch button on the right of the rotary but

21

SPECIFICATIONSConfigurationBus FormatUSB 2.0 / Compliant with the USB 2.0 Audio specificationSize254 mm x 96 mm x 36 mOperating : temp / Humidity0°C t

AES11 synchronizationYes, on AES 1 Input Yes, on AES 1 InputOther inputsADAT / S/PDIF* ADAT / S/PDIF** Not implemented yet. This will be available b

Channel phase difference (A/D Input and D/A Output)· +- 0.2° / 20 Hz-20 kHzJitter, jitter sensitivity and jitter suppression· AES3 (AES3-2003) com

ManagementWindows XP: DirectSound, ASIO, Digigram np SDK through Virtual PCXWindows Seven; DirectSound, ASIO, Core Audio, WASAPI, Digigram np SDK via

CANCUN 222-Mic schematic diagram26

CANCUN 442-Mic schematic diagram 27

CANCUN 222-Mic CABLECANCUN 222-Mic cable schematicCANCUN 222-Mic Wiring diagramCANCUN 222-Mic cable pinout28

Pin# Signal Pin# Signal1 ANALOG IN1 Left + 14 ANALOG IN1 Left -2 ANALOG IN2 Right + 15 ANALOG IN2 Right -3 Not connected 16 Not connected4 AES I

INFORMATION FOR THE USERIMPORTANT NOTICEFEATURESCancun 222-Mic and CANCUN 442-Mic main hardware featuresCANCUN 222-MicCANCUN 442-MicSoftware features

CANCUN 442-Mic CABLECANCUN 442-Mic cable schematic 30

CANCUN 442-Mic Wiring diagram 31

CACUN 442-Mic cable pinoutPin# Signal Pin# Signal1 ANALOG IN4 Right + 23 GND2 ANALOG IN4 Right - 24 GND3 ANALOG IN3 Left + 25 Not connected4 ANALO

33

INFORMATION FOR THE USERThe user’s manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or mo

CANCUN devices are delivered with a ‘Y’ USB cable allowing powering the device from two USB ports. It is recommended to connect the two USB plugs so a

CANCUN 442-Mic● 4 balanced analog mono line/mic inputs, +25 dBu max signal level● 4 balanced analog mono line outputs, +10 dBu max signal level● 2 add

It will then automatically be detected by the operating system.Under Windows operating systems, it is necessary to install the driver package for Wind

Accept the License Agreement, and click on Next. By default, driver files are installed in folder C:\Program Files\Digigram CANCUN. Select another fo

When the message “Preinstallation was successful. Click Next to continue” is displayed, click on Next. Click on Finish to finish the installation pro