Digigram CANCUN 442-Mic User Manual download pdf (Page 19)

SETTING CANCUN PARAMETERS FROM THE CANCUN

TOUCH PANEL

Input gains setting

Pad

Press the Pad touch button to enable/disable the fixed attenuation on the desired.

When PAD is ON, a green led appears. An attenuation of -30.0 dB is applied to the analog input signal.

When PAD is OFF, the LED is turned off. No attenuation is applied.

Note that the Pad status is reflected in the software Control Panel.

Variable analog input gain

The analog input gain is adjustable with the

upper rotary button when:

· the IN/OUT touch button on the right of

the rotary button is in position IN (green

led in front of IN)

· and the touch button on the left of the

rotary wheel is active (green led).

Pressing the button several times allows

selecting analog input 1, analog input 2, both

inputs, or no input (LED turned off).

The analog gain adjustment is then applied to

the selected input(s).

Note that moving the rotary button

automatically updates the fader position in

the software control panel for the concerned

channels.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 32 33

No comments

Digigram CANCUN 442-Mic User Manual Page 19